How to On-Board Program a Ford Mustang 2014 | Mr. Locksmith™ Winnipeg MB
Mr. Locksmith Automotive | Mr. Locksmith™ Winnipeg (204) 818-0805
KEY PROGRAMMING – PROGRAM A KEY USING
TWO PROGRAMMED KEYS
This procedure works only if two (2) or more programmed
keys are available.
1- Insert the first programmed PATS key into the
ignition and turn the key from the OFF position to the
RUN position (maintain the key in the RUN position
for approximately 3 seconds).
2- Turn the first key to the OFF position and remove the
key from the ignition.
3- Within 10 seconds of turning the key to the OFF
position, insert a second programmed PATS key into
the ignition and turn the key from the OFF position
to the RUN position (maintain the key in the RUN
position for approximately 3 seconds).
4- Turn the second key to the OFF position and remove
the key from the ignition.
5- Within 10 seconds of turning the key to the OFF
position, insert the new unprogrammed PATS key into
the ignition and turn the key from the OFF position
to the RUN position (maintain the key in the RUN
position for approximately 3 seconds).
6- To program additional key(s) (up to a
total of 8 keys can be programmed), repeat steps 1
– 5 for each additional key.
Step-by-Step Ford Key Fob Programming Instructions:
1- Close the car doors, then open the driver-side door. Press the UNLOCK button on the driver-side door.
2- Next, turn the ignition from OFF to RUN 8 times. …
3- Press any button on the Ford remote to be programmed. …
4- Have a second remote key fob? …
5- Finally, turn the ignition to OFF.
For further information on Car Key Programmers to go to Mr. Locksmith Tests 5+ Car Key Programmers on 2014 Ford Mustang
Hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.
Mr. Locksmith™
Locksmith Near Me Winnipeg | Mr. Locksmith™ Winnipeg (204) 818-0805
For Automotive Locksmith Training go to Become an Automotive Locksmith
Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.
————————————————————————————————-